Skip to content
Aquasalis VP variable-speed pool pump with pre-filter, rain cover and pipe adaptors

Pool pump

Aquasalis VP series

Variable-speed pool pump with a permanent-magnet motor, stepless 30–100 % speed and a 24-hour timer. Five models from 750 to 2,200 W.

  • Permanent-magnet motor with stepless speed from 30 to 100 %
  • Four programmable speed presets and a 24-hour timer
  • Large 4-litre pre-filter basket
  • IPX5, with a removable rain cover over the drive
  • Unions for 63 mm pipe, 75 mm optional
Buy online Where to buy

Online via PoolPartHub, authorised Aquasalis dealer.

Models

ModelMax. input powerMax. flowMax. headPower
VP 7750 W28 m³/h17 m1 HP
VP 111,100 W32 m³/h18.5 m1.5 HP
VP 131,300 W34.5 m³/h19.5 m1.75 HP
VP 181,800 W40 m³/h22 m2.4 HP
VP 222,200 W43 m³/h24 m3 HP

Run slower, use less

A pool rarely needs its pump at full speed. Filtering at a lower speed for longer moves the same water with far less energy, and much more quietly. The VP lets you set any speed between 30 and 100 %, so the pump runs only as hard as the moment requires.

Set it once

Store four speeds on the control panel — for example a low speed for daily filtering, a higher one for backwashing or running the heat pump — and let the 24-hour timer switch between them. The display offers six languages.

Made to stay outside

The pump is rated IPX5 and comes with a removable rain cover that keeps rainwater away from the drive. The 4-litre pre-filter catches leaves and hair before they reach the pump, so it needs emptying less often.